• MW700-1 MW700-1
  • mw700-1_m.png

Feature

Improvement in construction quality

  • "Vibratory three wheel roller", oscillatory or circular(normal) vibration is selected by switch at operator station depending on the job conditions. The oscillatory vibration is good for micro thin lift and the circular vibration is effective fot thick layer compaction.
  • Vibration/oscillation can be selected, All three drums, Front left drums, or front right drums only and the positive compaction of longitudinal joint and compaction is fully covered to the edge of curb of pavement.
  • Since the three wheel roller does not have overhang, the compactor at job sites adjacent to traffic can be done safety.
  • Also at the construction spot contiguous to a traffic opening zone, there are also few overhangs of a frame because of three wheel roller, and it reduces a minor collision with the vehicles it is running.

Specification

  • *Specifications are subject change without notice.
  • *Engine meets EPA standards.
  • *Using low quality fuel may cause engine failure.
MODEL MW700-1
WEIGHTS
Operating weight kg(lb) 8,770(19,335)
Load on front kg(lb) 4,460(9,833)
Load on rear kg(lb) 4,310(9,502)
DIMENSIONS
Overall length mm(in) 4,700(185)
Overall width mm(in) 2,100(83)
Overall height mm(in) 3,110(122)
Compaction width mm(in) 2,100(83)
COMPACTION
Centrifugal force Vib/Osc kN 90/145
Frequency Vib/Osc Hz(vpm) 49(2,580)
Static loner load front/rear Kg/cm 40.8/39.8
ENGINE
Make/model ISUZU / 4JJ1XDUA(Tire3)
Type Diesel, Water-cooled, 4-cycle,4cylinder with turbocharger

Related Product


In order to see PDF file,  Adobe© Reader™  is necessary.

In order to see PDF file, Adobe© Reader™ is necessary.
Download

Copyright©2016 SAKAI HEAVY INDUSTRIES,LTD. All Rights Reserved.

Jump to top