| EEEFeaturesEEE |
| |
Improvement of workability |
| @ |
|
By the largest working speed (27m/min)
and vibrating force (4700kgf) in this class, maximum compaction efficiency
could be achieved. |
| @ |
|
By compaction work in the neutral position
of the forward/backward lever, it is the most suitable for the modification
to make flat and smoothing work. |
| @ |
|
At the time of moving backward, the steering
wheel can be put away and therefore rolling compaction near the wall can
be possible. |
| |
Very easy operation |
|
|
During moving forward and backward, it
is not necessary to hold the steering wheel at all times. |
| @ |
|
Vibration proof design to reduce the vibration
of the steering wheel. |
| @ |
|
Coated the resin on the steering wheel.
It gives thermal insulation effect and reliable gripping. |
| @ |
|
l Easy movement can be possible by a carrier
(option). |
| |
Safety design |
| @ |
|
Lifting work in a groove can be made reliably
by a well-balanced hanging hook. |
| @ |
|
Interlocking mechanism is built-in, which
can start the engine when the lever is in the neutral position only. |
| @ |
|
Solid construction to protect the engine. |
| @ |
|
Sealed belt cover to prevent the belt from
breaking. |
| EEEFeaturesEEE |
| |
Improvement of workability |
| @ |
|
In compaction work at a narrow width place,
it is not necessary to do troublesome turn over and drag work. |
| @ |
|
Quick compaction work is possible in high
speed. |
| @ |
|
By compaction work in the neutral position
of the forward/backward lever, it is the most suitable for the modification
to make flat and smoothing work. |
| @ |
|
Work in a groove can be made reliably by
a guard and a hanging hook. |
| |
Very easy operation |
|
|
During the movement forward and backward,
it is not necessary to hold the steering wheel at all times. |
| @ |
|
Vibration proof design to reduce the vibration
of the steering wheel. |
| @ |
|
Coated the resin on the steering wheel.
It gives thermal insulation effect and reliable gripping. |
| @ |
|
Easy movement can be possible by a set-up
carrier (option). |
| |
Safety design |
| @ |
|
Lifting work in a groove can be made reliably
by a well-balanced hanging hook. |
| @ |
|
A wide guard pipe protects the engine. |
| EEEFeaturesEEE |
| |
Improvement of workability |
| @ |
|
As the both sides of the roll edge are
stuck out outward by 23mm from the frame, rolling compaction for the verge
of curb, etc. can be surely made confirming with the eyes. |
| @ |
|
Realized 270mm curve clearance which is
the largest in this industry and therefore it can be affordable to clear
the curb. |
| |
Very easy operation |
|
|
Power steering system by a built-in switch
in the forward/backward lever makes possible very easy operation. |
| @ |
|
The engine with cell-starter is equipped
with as standard. |
| @ |
|
ON-OFF for vibration can be made quite
timely operating a switch at hand. |
| |
Safety design |
| @ |
|
Parking brake is a switch type and can
be operated by one-touch at hand. In addition, if you start the car with
applying the brakes, an alarm sounds as a safety mechanism. |
| @ |
|
Dead man's arm and a drag are equipped
with as standard. |
| @ |
|
Avoidable a danger by an alarm switch which
is built-in in the forward/backward lever. |
