Features
| Best compaction quality and efficiency |
| • |
Two hydrostatic drive motors in the rear axle minimize any pushing or shoving of hot asphalt mix (HMA) mat. |
| • |
Pressurized water sprinkler and release agent spray systems are stndard to minimize pickup of HMA on tires. |
| Operators comfort |
| • |
Most of tire surfaces and sprinkler nozzles are visible from the operator's station. |
| • |
Extra water pump to fill a separate water tank is standard, which is designed for moisture-conditioning subbase materials and filling water tanks on other rollers on the HMA mat. |
| Easy Maintenance |
| • |
Rear wheels are powered by hydrostatic direct-drive motors. |
| • |
Water and release agent spray system with anti-clog package, i.e., a plastic water tank, triple-protection filtration, etc., and with perfect draining winterization. |
|
*Specifications are subject to change without notice.
*Engine meets EPA Interim Tier 3 standards.
*Using low quality fuel may cause engine failure.
| MODEL |
TZ701-1 |
| WEIGHTS |
| Operating weight |
kg(lb) |
13,000(28,660) |
| Load on front |
kg(lb) |
6,360(14,020) |
| Load on rear |
kg(lb) |
8,640(19,050) |
| DIMENSIONS |
| Overall length |
mm(in) |
4,985(196) |
| Overall width |
mm(in) |
2,275(90) |
| Overall height |
mm(in) |
2,905(114) |
| Wheelbase |
mm(in) |
3,850(152) |
| ENGINE |
| Make |
ISUZU |
| Model |
4JJ1XDJA (Tier3) |
| Type |
Diesel, Water-cooled, 4-cycle, direct injection type with turbo charger |
|
Download Catalogue(377KB)
