Welcome For Road-Building World Wide

SAKAI HEAVY INDUSTRIES,LTD.

> Vibrating Roller
SW652-1/652-1K Series SW652-catalogDownload Catalogue(856KB)
SW652-1
Features
Sakai patented compaction technologies
SW652-1/-1k, standard model features 4,020vpm high frequency vibration by which can efficiently achieve the density faster and create smoother hot mix asphalt(HMA) mat.
"B model", split drum type is also equipped with high frequency vibration and is easy to operate in the tight corner without pushing or shoving the material.
On "ND model", oscillatory or circular (normal) vibration is selected by switch at operator station depending on the job conditions. The oscillatory vibration is good for thin lift and the circular vibration is effective for thick layer compaction.
Operators comfort
Full view over drum surface, drum edge and sprinkler nozzles.
Auto shuft-off of water sprinkler when the Forward & Reverse lever is in the neutral position.
Easy Maintenance
Rugged articulated centre-pin joint.
Long life Sakai patenten rubber isolators for drums.
*Specifications are subject to change without notice.
*Engine meet EPA standards for SW652-1 series.
*Using low quality fuel may cause engine failure.
MODEL SW652-1 SW652B-1 SW652ND-1
SW652-1K SW652B-1K SW652ND-1K
WEIGHTS
Operating weight kg(lb) 7,100(15,650) 8,000(17,640) 7,400(16,310)
Load on front kg(lb) 3,450(7,605) 3,900(8,600) 3,600(7,935)
Load on rear kg(lb) 3,650(8,045) 4,100(9,040) 3,800(8,375)
DIMENSIONS
Overall length mm(in) 4,300(169)
Overall width mm(in) 1,615(64)
Overall height mm(in) 2,795(110)
Wheelbase mm(in) 3,100(122)
ENGINE
Make KUBOTA
Model (SW652-1 Series) V3307-DI-T-KDN (Interim Tier4)
Model (SW652-1K Series) V3307-DI-T-E2B-RRSH1
Type Diesel, Water-cooled, 4-cycle, direct injection type with turbo charger
VIBRATION SYSTEM
Drive Hydrostatic
Vibrator Eccentric shaft type
 

Copyright© SAKAI HEAVY INDUSTRIES,LTD. All Rights Reserved.